TEC Multipurpose Primer – 1 Gallon
TEC Multipurpose Primer is an acrylic latex-based primer for TEC brand self-leveling underlayments. It may also be used to enable the bonding of other TEC brand surface preparation products and latex-modified thin-set mortars to difficult substrates. For peel-and-stick tile installation, primer can be used on dry, porous concrete, gypsum cement underlayments, and plywood. It may also be used to promote bonds over cold-rolled steel substrates
Features
- Enables installation of ceramic tile or natural stone directly to metal, gypsum-based underlayments, glazed tile (without scarifying), and well-bonded epoxy coatings
- They are easily applied with a brush or roller for non-porous surfaces or a push broom for porous surfaces.
- Multipurpose primer for all approved porous and non-porous substrates
- Typically dries in 30 minutes to 3 hours under ideal ambient conditions.
- Remove all surface contaminants such as oil, grease, floor finishes, wax, and dirt.
- Do not apply over wet areas.
- Solvent-free
- DO NOT FREEZE. TEC Multipurpose Primer must be stored in an unopened container in a cool, dry location out of direct sunlight and protected from weather.
- Maximum of 1 year from date of manufacture in unopened package.
- Read complete cautionary information printed on the product container before use.
Suitable Properly Prepared Substrates
- Concrete
- Cementitious Back Units
- Cold rolled steel
- adhesive residue (except tacky or pressure-sensitive adhesive)
- Existing VCT, LVT, or non-cushioned sheet goods
- Exterior grade plywood, APA grade trademarked exterior plywood
Reviews
There are no reviews yet.